|
|
ftp
Internet File Transfer Program.
SYNTAX
ftp [options] -u url file [...]
Options
May be specified at the command line, or to the ftp command interpreter.
-n No `auto-login' upon initial connection.
-o output
When auto-fetching files, save the contents in output. output
is parsed according to the FILE NAMING CONVENTIONS. If output
is not `-' or doesn't start with `|', then only the first
file specified will be retrieved into output; all other files
will be retrieved into the basename of their remote name.
-P port Sets the port number to port.
-r wait Retry the connection attempt if it failed, pausing for wait seconds.
-u url file [...]
Upload files on the command line to url where url is one of the
ftp URL types as supported by auto-fetch (with an optional target
filename for single file uploads), and file is one or more
local files to be uploaded.
-v Enable verbose and progress.
-V Disable verbose and progress.
Also see the ftp Advanced options page for further options.
The client host with which ftp is to communicate may be
specified on the command line. If this is done, ftp will immediately attempt
to establish a connection to an FTP server on that host; otherwise, ftp will
enter its command interpreter and await instructions from the user. When ftp
is awaiting commands from the user the prompt `ftp>' is provided to the user.
The following commands are recognized by ftp:
account [passwd]
Supply a supplemental password required by a remote system
for access to resources once a login has been successfully
completed. If no argument is included, the user will be
prompted for an account password in a non-echoing input mode.
append local-file [remote-file]
Append a local file to a file on the remote machine. If
remote-file is left unspecified, the local file name is used
in naming the remote file after being altered by any ntrans
or nmap setting. File transfer uses the current settings for
type, format, mode, and structure.
ascii Set the file transfer type to network ASCII. This is the
default type.
binary Set the file transfer type to support binary image transfer.
bye Terminate the FTP session with the remote server and exit
ftp. An end of file will also terminate the session and
exit.
case Toggle remote computer file name case mapping during mget
commands. When case is on (default is off), remote computer
file names with all letters in upper case are written in the
local directory with the letters mapped to lower case.
cd remote-directory
Change the working directory on the remote machine to
remote-directory.
cdup Change the remote machine working directory to the parent of
the current remote machine working directory.
chmod mode remote-file
Change the permission modes of the file remote-file on the
remote system to mode.
close Terminate the FTP session with the remote server, and return
to the command interpreter. Any defined macros are erased.
cr Toggle carriage return stripping during ascii type file
retrieval. Records are denoted by a carriage return/linefeed
sequence during ascii type file transfer. When cr is on (the
default), carriage returns are stripped from this sequence to
conform with the UNIX single linefeed record delimiter.
Records on non-UNIX remote systems may contain single line-
feeds; when an ascii type transfer is made, these linefeeds
may be distinguished from a record delimiter only when cr is
off.
delete remote-file
Delete the file remote-file on the remote machine.
dir [remote-path [local-file]]
Print a listing of the contents of a directory on the remote
machine. The listing includes any system-dependent informa-
tion that the server chooses to include; for example, most
UNIX systems will produce output from the command `ls -l'.
If remote-path is left unspecified, the current working
directory is used. If interactive prompting is on, ftp will
prompt the user to verify that the last argument is indeed
the target local file for receiving dir output. If no local
file is specified, or if local-file is `-', the output is
sent to the terminal.
fget localfile
Retrieve the files listed in localfile, which has one line
per filename.
form format
Set the file transfer form to format. The default format is
`file'.
ftp host [port]
A synonym for open.
gate [host [port]]
Toggle gate-ftp mode, which used to connect through the TIS
FWTK and Gauntlet ftp proxies. This will not be permitted if
the gate-ftp server hasn't been set (either explicitly by the
user, or from the FTPSERVER environment variable). If host
is given, then gate-ftp mode will be enabled, and the gate-
ftp server will be set to host. If port is also given, that
will be used as the port to connect to on the gate-ftp
server.
get remote-file [local-file]
Retrieve the remote-file and store it on the local machine.
If the local file name is not specified, it is given the same
name it has on the remote machine, subject to alteration by
the current case, ntrans, and nmap settings. The current
settings for type, form, mode, and structure are used while
transferring the file.
glob Toggle filename expansion for mdelete, mget and mput. If
globbing is turned off with glob, the file name arguments are
taken literally and not expanded. Globbing for mput is done
as in csh(1). For mdelete and mget, each remote file name is
expanded separately on the remote machine and the lists are
not merged. Expansion of a directory name is likely to be
different from expansion of the name of an ordinary file: the
exact result depends on the foreign operating system and ftp
server, and can be previewed by doing `mls remote-files -'
Note: mget and mput are not meant to transfer entire direc-
tory subtrees of files. That can be done by transferring a
tar(1) archive of the subtree (in binary mode).
hash [size]
Toggle hash-sign (``#'') printing for each data block trans-
ferred. The size of a data block defaults to 1024 bytes.
This can be changed by specifying size in bytes. Enabling
hash disables progress.
help [command]
Print an informative message about the meaning of command.
If no argument is given, ftp prints a list of the known com-
mands.
lcd [directory]
Change the working directory on the local machine. If no
directory is specified, the user's home directory is used.
lpwd Print the working directory on the local machine.
ls [remote-path [local-file]]
A synonym for dir.
mdelete [remote-files]
Delete the remote-files on the remote machine.
mdir remote-files local-file
Like dir, except multiple remote files may be specified. If
interactive prompting is on, ftp will prompt the user to ver-
ify that the last argument is indeed the target local file
for receiving mdir output.
mget remote-files
Expand the remote-files on the remote machine and do a get
for each file name thus produced. See glob for details on
the filename expansion. Resulting file names will then be
processed according to case, ntrans, and nmap settings.
Files are transferred into the local working directory, which
can be changed with `lcd directory'; new local directories
can be created with `! mkdir directory'.
mkdir directory-name
Make a directory on the remote machine.
mls remote-files local-file
Like ls, except multiple remote files may be specified, and
the local-file must be specified. If interactive prompting
is on, ftp will prompt the user to verify that the last argu-
ment is indeed the target local file for receiving mls out-
put.
mlsd [remote-path]
Display the contents of remote-path (which should default to
the current directory if not given) in a machine-parsable
form, using MLSD. The format of display can be changed with
`remopts mlst ...'.
mlst [remote-path]
Display the details about remote-path (which should default
to the current directory if not given) in a machine-parsable
form, using MLST. The format of display can be changed with
`remopts mlst ...'.
mode mode-name
Set the file transfer mode to mode-name. The default mode is
`stream' mode.
modtime remote-file
Show the last modification time of the file on the remote
machine.
more file A synonym for page.
mput local-files
Expand wild cards in the list of local files given as argu-
ments and do a put for each file in the resulting list. See
glob for details of filename expansion. Resulting file names
will then be processed according to ntrans and nmap settings.
msend local-files
A synonym for mput.
newer remote-file [local-file]
Get the file only if the modification time of the remote file
is more recent that the file on the current system. If the
file does not exist on the current system, the remote file is
considered newer. Otherwise, this command is identical to
get.
nlist [remote-path [local-file]]
A synonym for ls.
open host [port]
Establish a connection to the specified host FTP server. An
optional port number may be supplied, in which case, ftp will
attempt to contact an FTP server at that port. If the
auto-login option is on (default), ftp will also attempt to
automatically log the user in to the FTP server (see below).
page file Retrieve file and display with the program specified by the
set pager option.
passive [auto]
Toggle passive mode (if no arguments are given). If auto is
given, act as if FTPMODE is set to `auto'. If passive mode
is turned on (default), ftp will send a PASV command for all
data connections instead of a PORT command. The PASV command
requests that the remote server open a port for the data con-
nection and return the address of that port. The remote
server listens on that port and the client connects to it.
When using the more traditional PORT command, the client lis-
tens on a port and sends that address to the remote server,
who connects back to it. Passive mode is useful when using
ftp through a gateway router or host that controls the direc-
tionality of traffic. (Note that though FTP servers are
required to support the PASV command by RFC 1123, some do
not.)
preserve Toggle preservation of modification times on retrieved files.
progress Toggle display of transfer progress bar. The progress bar
will be disabled for a transfer that has local-file as `-' or
a command that starts with `|'. Refer to FILE NAMING
CONVENTIONS for more information. Enabling progress disables
hash.
prompt Toggle interactive prompting. Interactive prompting occurs
during multiple file transfers to allow the user to selec-
tively retrieve or store files. If prompting is turned off
(default is on), any mget or mput will transfer all files,
and any mdelete will delete all files.
When prompting is on, the following commands are available at
a prompt:
a Answer `yes' to the current file, and automatically
answer `yes' to any remaining files for the current
command.
n Answer `no', and do not transfer the file.
p Answer `yes' to the current file, and turn off
prompt mode (as is ``prompt off'' had been given).
q Terminate the current operation.
y Answer `yes', and transfer the file.
? Display a help message.
Any other reponse will answer `yes' to the current file.
put local-file [remote-file]
Store a local file on the remote machine. If remote-file is
left unspecified, the local file name is used after process-
ing according to any ntrans or nmap settings in naming the
remote file. File transfer uses the current settings for
type, format, mode, and structure.
pwd Print the name of the current working directory on the remote
machine.
quit A synonym for bye.
reget remote-file [local-file]
reget acts like get, except that if local-file exists and is
smaller than remote-file, local-file is presumed to be a par-
tially transferred copy of remote-file and the transfer is
continued from the apparent point of failure. This command
is useful when transferring very large files over networks
that are prone to dropping connections.
rename [from [to]]
Rename the file from on the remote machine, to the file to.
reset Clear reply queue. This command re-synchronizes com-
mand/reply sequencing with the remote FTP server. Resynchro-
nization may be necessary following a violation of the FTP
protocol by the remote server.
rhelp [command-name]
Request help from the remote FTP server. If a command-name
is specified it is supplied to the server as well.
rmdir directory-name
Delete a directory on the remote machine.
rstatus [remote-file]
With no arguments, show status of remote machine. If
remote-file is specified, show status of remote-file on
remote machine.
type [type-name]
Set the file transfer type to type-name. If no type is spec-
ified, the current type is printed. The default type is net-
work ASCII.
usage command
Print the usage message for command.
user user-name [password [account]]
Identify yourself to the remote FTP server. If the password
is not specified and the server requires it, ftp will prompt
the user for it (after disabling local echo). If an account
field is not specified, and the FTP server requires it, the
user will be prompted for it. If an account field is speci-
fied, an account command will be relayed to the remote server
after the login sequence is completed if the remote server
did not require it for logging in. Unless ftp is invoked
with `auto-login' disabled, this process is done automati-
cally on initial connection to the FTP server.
verbose Toggle verbose mode. In verbose mode, all responses from the
FTP server are displayed to the user. In addition, if ver-
bose is on, when a file transfer completes, statistics
regarding the efficiency of the transfer are reported. By
default, verbose is on.
xferbuf size
Set the size of the socket send and receive buffers to size.
? [command]
A synonym for help.
Command arguments which have embedded spaces may be quoted with quote " marks.
Commands which toggle settings can take an explicit on or off argument to
force the setting appropriately.
Commands which take a byte count as an argument (e.g., hash, rate, and
xferbuf) support an optional suffix on the argument which changes the
interpretation of the argument. Supported suffixes are:
b Causes no modification. (Optional)
k Kilo; multiply the argument by 1024
m Mega; multiply the argument by 1048576
g Giga; multiply the argument by 1073741824
If ftp receives a SIGINFO (see the ``status'' argument of stty(1)) or
SIGQUIT signal whilst a transfer is in progress, the current transfer
rate statistics will be written to the standard error output, in the same
format as the standard completion message.
AUTO-FETCHING FILES
In addition to standard commands, this version of ftp supports an auto-fetch feature. To enable auto-fetch, simply pass the list of host-names/files on the command line.
The following formats are valid syntax for an auto-fetch element:
[user@]host:[path][/]
`Classic' FTP format.
If path contains a glob character and globbing is enabled, (see
glob), then the equivalent of `mget path' is performed.
If the directory component of path contains no globbing characters,
it is stored locally with the name basename (see basename(1)) of
path, in the current directory. Otherwise, the full remote name is
used as the local name, relative to the local root directory.
ftp://[user[:password]@]host[:port]/path[/][;type=X]
An FTP URL, retrieved using the FTP protocol if set ftp_proxy isn't
defined. Otherwise, transfer the URL using HTTP via the proxy
defined in set ftp_proxy. If set ftp_proxy isn't defined and user
is given, login as user. In this case, use password if supplied,
otherwise prompt the user for one.
In order to be compliant with RFC 1738, ftp strips the leading `/'
from path, resulting in a transfer relative from the default login
directory of the user. If the / directory is required, use a lead-
ing path of `%2F'. If a user's home directory is required (and
the remote server supports the syntax), use a leading path of
`%7Euser/'. For example, to retrieve /etc/motd from `localhost'
as the user `myname' with the password `mypass', use
`ftp://myname:mypass@localhost/%2fetc/motd'
If a suffix of `;type=A' or `;type=I' is supplied, then the trans-
fer type will take place as ascii or binary (respectively). The
default transfer type is binary.
http://[user[:password]@]host[:port]/path
An HTTP URL, retrieved using the HTTP protocol. If set http_proxy
is defined, it is used as a URL to an HTTP proxy server. If HTTP
authorisation is required to retrieve path, and `user' (and option-
ally `password') is in the URL, use them for the first attempt to
authenticate.
file:///path
A local URL, copied from /path.
Unless noted otherwise above, and -o output is not given, the file is
stored in the current directory as the basename(1) of path.
If a classic format or an FTP URL format has a trailing `/' or an empty
path component, then ftp will connect to the site and cd to the directory
given as the path, and leave the user in interactive mode ready for fur-
ther input. This will not work if set ftp_proxy is being used.
Direct HTTP transfers use HTTP 1.1. Proxied FTP and HTTP transfers use
HTTP 1.0.
If -R is given, all auto-fetches that don't go via the FTP or HTTP prox-
ies will be restarted. For FTP, this is implemented by using reget
instead of get. For HTTP, this is implemented by using the `Range:
bytes=' HTTP/1.1 directive.
If WWW or proxy WWW authentication is required, you will be prompted to
enter a username and password to authenticate with.
When specifying IPv6 numeric addresses in a URL, you need to surround the
address in square brackets. E.g.: `ftp://[::1]:21/'. This is because
colons are used in IPv6 numeric address as well as being the separator
for the port number.
ABORTING A FILE TRANSFER
To abort a file transfer, use the terminal interrupt key (usually Ctrl-C).
Sending transfers will be immediately halted.
FILE TRANSFER PARAMETERS
The FTP specification specifies many parameters which may affect a file
transfer. The type may be one of `ascii', `image' (binary),
`ebcdic', and `local byte size' (for PDP-10's and PDP-20's mostly).
ftp supports the ascii and image types of file transfer, plus local byte
size 8 for tenex mode transfers.
ftp supports only the default values for the remaining file transfer
parameters: mode, form, and struct.
Notes
Also see the ftp Advanced options page which
details:
"Happy is harder than money. Anyone who thinks money will make them happy, doesn't have money - David Geffen
Related commands:
getservbyname(3), editrc(5), services(5), ftpd(8)
FTP: Cyberduck - FTP client (free)
FTP: Panic Transmit - FTP client
Equivalent BASH command:
ftp - Internet File Transfer Program
